Shi Y., Durrell J., Dennis A.R., Cardwell D., Ainslie M., Beck M., Cientanni V., Tsui Y.K., Moseley D.
Ключевые слова: HTS, GdBCO, bulk, single grain, rings, pulsed magnetization, trapped field distribution, trapped field, temperature dependence, experimental results
Shi Y., Cardwell D.A., Durrell J.H., Ainslie M.D., Dennis A.R., Tsui Y., Moseley D.A., Cientanni V., Beck M.R.
Ключевые слова: HTS, YBCO, GdBCO, EuBCO, bulk, single grain, high field magnets, portable unit, trapped field magnets, pulsed magnetization, trapped field, experimental results
Cardwell D.A., Durrell J.H., Ainslie M.D., Dennis A.R., Shi Y.-H., Tsui Y., Moseley D.A., Cientanni V., Beck M.R.
Ключевые слова: HTS, GdBCO, bulk, rings, pulsed magnetization, trapped field, cooling technology, experimental results
Ключевые слова: HTS, bulk, single grain, rings, pulsed magnetization, flux jumps, penetration depth, modeling, current density, distribution, magnetic field distribution, trapped field
Ключевые слова: MgB2, bulk, trapped field magnets, pulsed magnetization, flux jumps, trapped field, temperature dependence
Yan F., Geng H., Meng C., Zhao Y., Shi H., Ouyang H., Huang T., He F., Wang J., Ge R., Sui Y., Ye Q., Liu R., Wang Q., Wang S., Pan J.C.
Ключевые слова: commissioning, accelerator magnets, proton irradiation, cavity, design, cryogenic systems, operational performance
Ключевые слова: LTS, NbTi, coils, quench protection, measurement setup, mechanical effects, experimental results
Ключевые слова: HTS, coated conductors, fabrication, substrate Hastelloy, buffer layers, planarization, MOD process, roughness, YBCO, PLD process, laminations
Ghoshal P.K., Kashy D., Tsui Y., Rajput-Ghoshal R., Legg R., Fair R.J., Hampshire D., Hagen-Gates V.
Ключевые слова: fusion magnets, coils toroidal, HTS, coated conductors, joints superconducting , fabrication, solder, interfaces, resistance, upper critical fields, electrical conductivity, thermal conductivity, joint resistances, temperature dependence, critical caracteristics, current-voltage characteristics
Ключевые слова: rotating machines, rotors, supporting structure, bearing magnetic, modeling, numerical analysis, bulk, experimental results
Ключевые слова: HTS, YBCO, coated conductors, coils pancake, SMES, numerical analysis, experimental results, quench detection, cryocoolers, cryogenic systems
Ключевые слова: HTS, YBCO, coated conductors, TFA-MOD process, fabrication, growth rate, thickness dependence
Ключевые слова: HTS, YBCO, coated conductors, TFA-MOD process, precursors, composition, critical current, heat treatment, fabrication
Ключевые слова: bearing magnetic, rotors, vibration, HTS, bulk, modeling, numerical analysis
Ключевые слова: bearing magnetic, HTS, bulk, magnets permanent, vibration, rotors, numerical analysis, experimental results, nonlinear effects
Ключевые слова: LTS, Nb3Sn, critical caracteristics, strands, internal tin method, bronze process, comparison, heat treatment, strain effects, angular dependence, current-voltage characteristics, critical current density, magnetic field dependence, temperature dependence, critical current, n-value, ITER, experimental results
Ключевые слова: HTS, YBCO, coated conductors, TFA-MOD process, fabrication, high rate process, substrate Hastelloy, IBAD process
Ключевые слова: coils racetrack, coils, displacements, measurement technique, numerical analysis, comparison
Watanabe K., Kitaguchi H., Kumakura H., Matsumoto A., Yamada H., Matsui Y., Hara T., Uchiyama N., Asthana A.
Ключевые слова: MgB2/Fe, tapes, PIT process, doping effect, microstructure, Jc/B curves, in-situ process, fabrication, critical caracteristics
Ключевые слова: measurement technique, minimum quench energy, winding configurations
Nishijima G., Watanabe K., Matsui Y., Goto T.(goto.tomoko@nitech.ac.jp), Nagai T., Sato E., Tsuruta C.
Ключевые слова: HTS, REBCO, fabrication, filaments, Jc/B curves, microstructure, critical caracteristics
Gritzner G., Deinhofer C., Kim B.-J., Matsui Y., Horiuchi S.(s.horiuchi@ibaraki.email.ne.jp), Jeong D.-Y.
Ключевые слова: HTS, other HTS, films epitaxial, buffer layers, substrate Ag, coated conductors, microstructure, fabrication, screen printing
Watanabe K., Matsui Y., Goto T.(goto.tomoko@nitech.ac.jp), Ban E., Nagai T., Yokosawa T.
Ключевые слова: HTS, REBCO, filaments, pinning centers, nanodoping, Jc/B curves, heat treatment, anisotropy, fabrication, experimental results, critical caracteristics
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.